The Latest News from Mouser Electronics

Mouser Electronics, Inc. is focused on supplying 100% certified, genuine products from its manufacturing partners for electronic design engineers and buyers. Mouser introduces hundreds of new products each month and supports innovation by supplying engineers with the newest products, technologies and resources.

The news highlights from Mouser this week are:

  • New Product – Mouser Now Stocking onsemi NCN26010 Ethernet Controller, Providing Reduced Wiring and Costs

Mouser is now stocking the NCN26010 Industrial Ethernet Controller from onsemi. This 10BASE-T1S Ethernet controller is designed to provide reliable multi-point communication in industrial settings. The NCN26010 is a 10Mb/s, IEEE 802.3cg compliant device including a media access controller (MAC), a PLCA reconciliation sublayer (RS), and a 10BASE-T1S PHY, designed for industrial multi-drop Ethernet networks. The device can enable more than 40 nodes on a single twisted pair, exceeding five times the amount of nodes requested by the IEEE 802.3cg standard, reducing installation cost and set-up complexity. This PHY + MAC controller for 10BASE-T1S can connect to controllers, sensors and other devices without the need for an external MAC. This product reduces in-cabinet wiring up to 70% while significantly increasing bandwidth. In backplanes, it simplifies the layout and power distribution without impacting data rates or latencies. The NCN26010 makes an ideal replacement for legacy point-to-point and multi-point industrial communication standards. The T1S MAC/PHY device can replace RS-485, CAN, RS-232, HART and others. The NCN26010 controller is supported by the NCN26010XMNEVB 10BASE-T1S MACPHY evaluation board, the NCN26010BMNEVB Adapter Board, and the NCN26010XMNEVK 10BASE-T1S SPE evaluation kit.

Full press release here: https://eu.mouser.com/newsroom/publicrelations-onsemi-ncn26010-ethernet-controller-2023final/

  • New Webinar – Mouser and Texas Instruments Present Webinar on Simplifying EV Charger Designs

Mouser has teamed up with Texas Instruments to provide the engineering community with a new webinar entitled “How to Simplify EV Charger Designs using C2000™ Microcontrollers.” The free live webinar will take place at 3 pm CET on 27 June 2023. As technology for electric vehicles (EVs) develops, there is now a growing demand for EVs to support both onboard charging (OBC) and DC fast charging. These additional requirements make it essential to develop simpler modular charging solutions that are easily scalable. The webinar will highlight the importance of choosing a suitable MCU product family designed for efficiency in EV applications, such as TMS320F2838x/TMS320F2838x-Q1 C2000 32-Bit MCUs and TMS320F2837xD Delfino Dual-Core MCUs, as well as accompanying development kits such as the LAUNCHXL-F280039C LaunchPad™ or the LAUNCHXL-F2800137 LaunchPad™ for initial evaluation and prototyping. By attending this webinar, participants will learn about the features of an MCU to create scalable modular charging solutions, the flexibility of key peripherals and reference designs for charging solutions. The webinar will be presented by Navaneeth Kumar at Texas Instruments.

Full press release here: https://eu.mouser.com/newsroom/publicrelations-emea-ti-webinar-2023/

  • New Product – Mouser Now Stocking the Skyworks Si828x-BAWB-KIT Gate Driver Board for XM3 Aimed at Automotive/EV and Industrial Apps

Mouser is now stocking the Si828x-BAWB-KIT gate driver board for XM3 from Skyworks Solutions, Inc. Intended to replace more complex power stage designs with a simpler, cost-effective solution, the Si828x-BAWB-KIT is Skyworks’ next generation isolated gate driver board (GDB) reference design optimised for Silicon Carbide (SiC) Field Effect Transistors (FETs). The Si828x-BAWB-KIT touts an enhanced GDB layout perfect for Silicon SiC FETs like the XM3 half-bridge module from Wolfspeed, which works in tandem with the Skyworks GDB to immensely improve power density and power efficiency for demanding automotive applications such as hybrid electric vehicles, EV drivetrains, and EV fast chargers, as well as industrial motor drives, power supplies, and AC, Brushless and DC motor controls. The Si828x-BAWB-KIT gate driver board available combines the robust Skyworks’ GDB short-circuit protection features with the rugged SiC XM3 module to better shield the high voltage/high current XM3 module from overload and circuit damage and effortlessly implement the power switching stage of a system. The Si828x gate driver board was specifically designed to protect the XM3 power module during a short circuit event, detecting any load fault and shutting off the power module in under a microsecond. Together, the Wolfspeed XM3 module and Skyworks GDB enhance power density over previous modules and discrete approaches to offer a complete, pre-tested and proven solution for the market.

Full press release here: https://eu.mouser.com/newsroom/publicrelations-skyworks-si828x-bawb-kit-2023final/

  • New Instalment – Mouser Explores the Intersection of Smart-Home Tech with Matter Protocol in Empowering Innovation Together Series

Mouser launches the next instalment of its award-winning Empowering Innovation Together (EIT) series highlighting the Matter protocol. With this instalment, Mouser brings together global technology experts from the Connectivity Standards Alliance (CSA) and industry-leading manufacturers to explore all aspects of Matter, from market introduction to design specifications. With its widespread industry support from leading semiconductor manufacturers, including NXP Semiconductors, Silicon Labs, STMicroelectronics, Schneider Electric, Texas Instruments, Infineon Technologies, Nordic Semiconductor and Microchip Technology Inc., Matter promises to revolutionise smart home technology. In this instalment, Mouser provides insights and resources to equip engineers and developers with the knowledge needed to design products that harness the power of this new standard. The Matter series features two new episodes of The Tech Between Us podcast, hosted by Mouser’s Director of Technical Content Raymond Yin. Through educational interviews, infographics, articles, webinars and blogs, this instalment explores topics like how to choose a suitable System-on-Module (SoM) for integration, tips for using Matter in product development, tutorials on developing applications based on Matter and more.

Full press release here: https://eu.mouser.com/newsroom/publicrelations-eit-episode-2-matter-2023final/

  • New Award – Mouser Named Global High Service Distributor of the Year by Molex for Sixth Year

Mouser is proud to announce that it has received the 2022 Global High Service (Catalog) Distributor of the Year Award from Molex, a global electronics leader and connectivity innovator. This is the sixth year for Mouser to win this top global award. Mouser received the honours for helping Molex achieve outstanding financial growth in e-commerce sales, as well as for attaining significant customer growth for Molex across the globe. Mouser also won the Molex Global e-Catalog Distributor of the Year Award for 2020, 2019, 2015, 2014, and 2013, and earned the Americas e-Catalog Distributor of the Year Award for 2021, 2020 and 2019, and the European and APS e-Catalog Distributor of the Year Awards for 2020–2018. Molex also honored Kristina Cole, Corporate Supplier Manager at Mouser, with the Molex MVP Award for 2020.

Full press release here: https://eu.mouser.com/newsroom/publicrelations-molex-global-doy-2023final/

To see more new products and Mouser news, go to https://eu.mouser.com/pressroom

About Mouser Electronics

Mouser Electronics, a Berkshire Hathaway company, is an authorised semiconductor and electronic component distributor focused on New Product Introductions from its leading manufacturer partners. Serving the global electronic design engineer and buyer community, the global distributor’s website, mouser.com, is available in multiple languages and currencies and features more than 6.8 million products from over 1,200 manufacturer brands. Mouser offers 27 support locations worldwide to provide best-in-class customer service in local language, currency and time zone. The distributor ships to over 650,000 customers in 223 countries/territories from its 1 million-square-foot, state-of-the-art distribution facilities in the Dallas, Texas, metro area. For more information, visit https://www.mouser.com/.