Rohde & Schwarz and Altoo Measurement Science invite you to join our free seminar tour!
We combine the oscilloscope fundamentals training with the introduction of the new MXO 3 oscilloscope, to help you understand the important parameters when using a modern oscilloscope.
In this seminar we will focus on the following topics:
- Block diagram and how does a modern oscilloscope work i.e. Frontend, A/D Converter, Acquisition processing, Memory, Trigger, Display, FFT
- How to optimize a scope setup for the best measurement accuracy
- Specifications and how to understand them and use them
- Advanced triggering and integrating frequency domain FFT based spectrum analysis with time domain events
- Oscilloscope Probes, passive vs. active
- Measurement examples
AGENDA:
08:30 – 09:00 Welcome & Registration
09:00 – 10:30 MXO3 Introduction & Scope Fundamentals – Part 1
10:30 – 11:00 Coffee Break
11:00 – 12:15 MXO3 Introduction & Scope Fundamentals – Part 2
12:15 – 13:00 Lunch Break
13:00 – 15:00 Hands-on Sessions: Try out our 8 set-ups and test your knowledge
JOIN US HERE:
AARHUS: 04.11.2025 – 08:30 – 15:00
Montra Hotel Sabro Kro
Viborgvej 780
8471 Sabro
Register here for Aarhus
SØNDERBORG: 05.11.2025 – 08:30 – 15:00
SDU Sønderborg
Alsion 2
6400 Sønderborg
Lokale: M201
Register here for Sønderborg
ODENSE: 12.11.2025 – 08:30 – 15:00
SDU Odense
Det Tekniske Fakultet
Campusvej 55
5230 Odense
Lokale: U31
Register here for Odense
HØRSHOLM: 13.11.2025 – 08:30 – 15:00
Altoo Measurement Science ApS
Agern Alle 24
2970 Hørsholm
Register here for Hørsholm
Registration must be done by Friday, October 31st, 2025.
We will provide food and drinks during the training.
Please don´t hesitate to contact us for any further information.
We are looking forward to welcoming you!
Rohde & Schwarz – Altoo Measurement Science
MXO 3 FACTS:
Fast: Capture more real-time signal activity than ever before
Precise: Isolate small details in the presence of larger signals
Compact: Get more channels in the same small chassis
- 100 MHz to 1 GHz bandwidth
- Up to 5 GSample/s sample rate
- 125 Mpoints per channel standard memory
- 12-bit ADC at all sample rates
- 18-bit architecture with HD mode
- Precise Digital trigger
- 4.5 million acquisition/s per channel
- 4 or 8 channels
- Display: 11.6“ Full HD with capacitive touch
- Operating system: Linux
